Inny tytuł:

Efficiency of a Continuous Thermal Sterilization

Wydawca:

Committee on Biotechnology PAS ; Institute of Bioorganic Chemistry PAS

Abstrakt:

An installation for continuous thermal sterilization with steam injection into liquid, constructed within the research project CPBP 0.4.11., has been presented. The installation output is 0,05 to 0,25° m/h. Feasible sterilization conditions: temperature up to 150°C, holding time to 200 s.To determine the sterilization efficiency, a direct method was applied. A liquid containing a defined number of microorganisms was introduced to the sterilizer. Two strains of Bacillus were used. Next, the number of microorganisms was determined in the liquid after sterilization.Tests confirmed full applicability of the installation for continuous sterilization of liquids.

Czasopismo/Seria/cykl:

Biotechnologia, vol.10, 4 (1990)-.

Tom:

10

Zeszyt:

4

Strona pocz.:

51

Strona końc.:

60

Szczegółowy typ zasobu:

Article

Format:

application/pdf

Identyfikator zasobu:

0860-7796 ; oai:rcin.org.pl:182897

Źródło:

Library of Institute of Bioorganic Chemistry PAS

Język:

pol

Język streszczenia:

eng

Zakres czasowy:

1988-2010

Prawa:

Creative Commons Attribution BY-SA 4.0 license

Zasady wykorzystania:

Copyright-protected material. [CC BY-SA 4.0] May be used within the scope specified in Creative Commons Attribution BY-SA 4.0 license, full text available at:

Digitalizacja:

Institute of Bioorganic Chemistry of the Polish Academy of Science

Lokalizacja oryginału:

Institute of Bioorganic Chemistry of the Polish Academy of Science

Dofinansowane ze środków:

Operational Program Digital Poland, 2014-2020, Measure 2.3: Digital accessibility and usefulness of public sector information; funds from the European Regional Development Fund and national co-financing from the state budget.

Dostęp:

Open