• Przejdź do menu głównego
• Przejdź do wyszukiwarki
• Przejdź do treści
• Przejdź do stopki

• Wyszukaj w całym Repozytorium
• Piśmiennictwo i mapy
• Archeologia
• Baza Młynów
• Nauki przyrodnicze

Szukaj w Repozytorium

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Nazwa/Tytuł Lokalizacja geograficzna Czasopismo/Seria/cykl Temat i słowa kluczowe

n.e. p.n.e.

n.e. p.n.e.

i lub

Nazwa/Tytuł Lokalizacja geograficzna Czasopismo/Seria/cykl Temat i słowa kluczowe

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Szukaj w Piśmiennictwo i mapy

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Tytuł Czasopismo/Seria/cykl Autor/Twórca Temat i słowa kluczowe Wydawca Data wydania Zakres przestrzenny

n.e. p.n.e.

n.e. p.n.e.

i lub

Tytuł Czasopismo/Seria/cykl Autor/Twórca Temat i słowa kluczowe Wydawca Data wydania Zakres przestrzenny

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Szukaj w Archeologia

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Nazwa Lokalizacja Rodzaj obiektu Kierownik badań/ Twórca kolekcji Chronologia Czasopismo/Seria/cykl Charakterystyka obiektu- surowiec Numer inwentarzowy

n.e. p.n.e.

n.e. p.n.e.

i lub

Nazwa Lokalizacja Rodzaj obiektu Kierownik badań/ Twórca kolekcji Chronologia Czasopismo/Seria/cykl Charakterystyka obiektu- surowiec Numer inwentarzowy

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Szukaj w Baza Młynów

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Nazwa ujednolicona Lokalizacja Rodzaj obiektu

n.e. p.n.e.

n.e. p.n.e.

i lub

Nazwa ujednolicona Lokalizacja Rodzaj obiektu

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Szukaj w Nauki przyrodnicze

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Akronim zielnika Numer/kod Kategoria ponadrodzajowa Nazwa łacińska Nazwa polska Lokalizacja Data zebrania Zbieracz/ Obserwator Typ (nomenklaturowy)

n.e. p.n.e.

n.e. p.n.e.

i lub

Akronim zielnika Numer/kod Kategoria ponadrodzajowa Nazwa łacińska Nazwa polska Lokalizacja Data zebrania Zbieracz/ Obserwator Typ (nomenklaturowy)

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Typ nomenklaturowy

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Poproś o dostęp

Odmowa wysyłania. Niepoprawny tekst z obrazka.

Odmowa wysyłania. Weryfikacja reCAPTCHA nie powiodła się.

Nie masz uprawnień do wyświetlenia tego obiektu. Aby poprosić o dostęp do niego, wypełnij poniższe pola.

E-mail^* Uzasadnienie^*

Wpisz tekst z obrazka. ^*

Anuluj Wyślij

Obiekt

Pobierz opis bibliograficzny

• ris
• BibTeX
• EndNote
• Csv

• pl en

Zaktualizowano subskrypcję.

Błąd podczas zmiany subskrypcji.

• Pokaż treść

Pobierz

• Opis
• Informacje
• Struktura

Tytuł: Some Problems Concerning the Deformation of Anisotropic Cosserat Elastic Shells

Twórca:

Birsan, M.

Data wydania/powstania:

2008

Typ zasobu:

Text

Więcej

Inny tytuł:

Prace IPPT IFTR Reports ; 2/2008

Współtwórca:

Kotulski, Zbigniew (1955– ) : Red. ; Kowalczyk, Piotr Marian : Red. ; Sosnowski, Włodzimierz : Red.

Wydawca:

Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk

Miejsce wydania:

Warszawa

Opis:

Proceedings of the 36th Solid Mechanics Conference, Gdańsk, Poland, September 9-12, 2008 ; Extended Abstracts of Conference Lectures ; 352-353 s.

Typ obiektu:

Book/Chapter

Czasopismo/Seria/cykl:

Prace IPPT IFTR REPORTS

Szczegółowy typ zasobu:

Book

Format:

application/pdf

Identyfikator zasobu:

978-83-89687-35-7 ; 83-89687-35-6 ; oai:rcin.org.pl:33346

Źródło:

IPPT PAN, call no. 56050 ; kliknij tutaj, żeby przejść

Język:

eng

Prawa:

Rights Reserved - Free Access

Zasady wykorzystania:

Copyright-protected material. May be used within the limits of statutory user freedoms

Digitalizacja:

Institute of Fundamental Technological Research of the Polish Academy of Sciences

Lokalizacja oryginału:

Library of the Institute of Fundamental Technological Research of The Polish Academy of Sciences

Dofinansowane ze środków:

Programme Innovative Economy, 2010-2014, Priority Axis 2. R&D infrastructure ; European Union. European Regional Development Fund

Dostęp:

Open

Temat i słowa kluczowe:

Mechanika - konferencje [KABA] Mechanika [KABA] Mechanika komputerowa Mechanika zniszczenia

Kolekcje, do których przypisany jest obiekt:

• Repozytorium Cyfrowe Instytutów Naukowych > Kolekcje Partnerów > Instytut Podstawowych Problemów Techniki PAN > Książki > Prace IPPT
• Repozytorium Cyfrowe Instytutów Naukowych > Piśmiennictwo > Książki/Rozdziały

Data ostatniej modyfikacji:

2 paź 2020

Data dodania obiektu:

16 wrz 2013

Liczba pobrań / odtworzeń:

304

Wszystkie dostępne wersje tego obiektu:

https://rcin.org.pl./publication/19829

Wyświetl opis w formacie RDF:

RDF

Wyświetl opis w formacie RDFa:

RDFa

Wyświetl opis w formacie OAI-PMH:

OAI-PMH

• Selected topics of contemporary solid mechanics : Praca zbiorowa
  • Strony tytułowe, przedmowa, spis treści, indeks autorów
  • Ritchie, R. O., 2008, On the fracture mechanics of bone and its biological degradation
  • Kaczmarek, M., 2008, Bio-poromechanics. Problems of Modelling Tissues and Biomaterials
  • Itskov, M., 2008, An Anisotropic Micromechanically Based Viscoelastic Model for Soft Collageneous Tissues
  • Colak, O. U., 2008, Cyclic Behavior of Ultra High Molecular Weight Polyethylene (UHMWPE) and Modeling
  • John, A., 2008, Selected Applications of Interval and Fuzzy Analysis in Biomechanics
  • Majchrzak, E., 2008, Solution of the Cattaneo-Vernotte Bio-Heat Transfer Equation by Means of the Dual Reciprocity Method
  • Piechór, K., 2008, Travelling Waves in Two Mechanochemical Models of Tumor Angiogenesis
  • Cieszko, M., 2008, Interaction of Ultrasonic Waves with Continuous Inhomogeneity of Porous Materials
  • John, A., 2008, The Numerical Modeling of Osteoporotic Changes in Selected Biomechanical Structures
  • Kowalczyk, P., 2008, Effect of Special Layers Shaping on Stress Distribution in Dental Restoration
  • Kopernik, M., 2008, Numerical Modelling of the Opening Process of the Three-Coating Aortic Valve
  • Gambin, W., 2008, Analysis of Shrinkage Stresses in Light-Cured Dental Restorations
  • Maciejewski, I., 2008, Application of Biomechanical Models in Design and Simulation of Active and Passive Vibration Damping
  • Cieszko, Mieczysław, 2008, Application of Micro Computer Tomography to Identification of Pore Structure Parameters of Porous Material
  • Kowalczyk, P., 2008, Orthotropic Model of Cancellous Bone. Application to Simulation of Adaptive Remodelling
  • Nowak, B., 2008, Modelling Bone-Implant Dynamics
  • Lekszycki, Tomasz, 2008, Modeling of Bone-Bioresorbable Graft Interaction
  • Foryś, U., 2008, Multidimensional Lotka-Volterra Systems for Carcinogenesis Mutations
  • Nowak, M., 2008, On Some Properties of Bone Functional Adaptation Phenomenon Useful In Mechanical Design
  • Gzik, M., 2008, Analysis of Influence of Human Head Movement on Cervical Spine Loading Conditions
  • Dąbrowska-Tkaczyk, A., 2008, Evaluation Method for Orthotropic Properties of Bone Tissue "in situ"
  • Gambin, Barbara, 2008, Rayleigh Scattering of Ultrasounds in Cancellous Bone
  • Gambin, Barbara, 2008, Fabric Tensor and Strength Surface of Bone-Like Materials
  • Wittenberghe, J. V., 2008, Analysis of a Preloaded Conical Threaded Pipe Connection
  • Ptaszny, J., 2008, Fast Multipole Evaluation of Domain Terms in Integral Equations of Two-Dimensional Elasticity
  • Chróścielewski, J., 2008, Modelling of Wave Propagation in Spatial Frame Elements - Numerical Simulations and Experimental Works
  • Beluch, W., 2008, Evolutionary Identification of Laminates' Stochastic Parameters
  • Orantek, P., 2008, The Local Gradient Method Supported by Artificial Neural Network in Granular Identification Problems
  • Kokot, G., 2008, The Complex Welding Process Simulation Using FEM, Parallel Computing and Grid Based Evolutionary Optimization
  • Fialko, S., 2008, Aggregation Multilevel Iterative Solver Based on Sparse Matrices Technique
  • Rec, T., 2008, Numerical Modeling of Macro Segregation Evolution and Change of Stress-Strain State in Billet During Continuous Casting with Mechanical Soft Reduction
  • Knabel, Jarosław, 2008, Structural Reliability Analysis Using Object Oriented Environment STAND
  • Czarnecki, S., 2008, An Elastic Cube Subjected to Anti-Symmetrical Pressure Loading. Exact 3D Analytical Formulae Versus Numerical Solutions Based on Meshfree Method
  • Abushawashi, Y. M., 2008, Convergence Behaviour for KPT Finite Elements
  • Gonzalez, I. M., 2008, ANN Approach for Modelling Orthogonal Cutting
  • Zmitrowicz, A., 2008, Contact Stresses - Models and Methods of Computations
  • Paczelt, I., 2008, Numerical Analysis of Some Steady State Wear Problems
  • Pidvysotskyy, V., 2008, Physical and Numerical Simulation of Forging of Cu-Cr Alloy
  • Szybiński, B., 2008, Numerical Analysis of Residual Stresses in Welds of Thick-walled Pressure Vessels
  • Garwolińska, A., 2008, Numerical Simulations of Laboratory and Field Tests of Permeability
  • Bednarek, T., 2008, Computer Aided Design of Vibrating Structures Accounting for Material Fatigue and Reliability
  • Dziatkiewicz, G., 2008, Indirect Trefftz Solutions for Plane Piezoelectricity by Stroh Formalism and Collocation Technique
  • Marin, N. C., 2008, Lagrangian and ALE Approach for Predicting Residual Stresses in Orthogonal Cutting
  • Łukasiak, T., 2008, The Adaptive NEM-Delaunay Elements
  • Orantek, P., 2008, Stochastic Identification in Thermomechanical Structures Using Evolutionary Algorithms
  • Wójcik, M., 2008, FE-Simulations of Dynamic Shear Localization in Granular Bodies Using an Arbitrary Lagrangian-Eulerian Formulation
  • Jach, K., 2008, Numerical Analyzes of Armour Steel Plates Penetration Process by Subcalibre Projectiles with Monolith and Segmented Penetrators
  • Jurczak, G., 2008, Indium Clusters Evolution in a InGaN/GaN QW
  • Ilic, S., 2008, Application of the Multiscale FEM to the Modeling of Composite Materials
  • Danielewski, M., 2008, Mechano-Chemistry at Different Lenght Scales
  • Frischmuth, K., 2008, Hyperbolic Heat Conduction with Fuzzy Parameters
  • Oliferuk, Wiera, 2008, Pulsed IR Thermography for Detection of Material Defects
  • Rahaei, M. B., 2008, Comparison Lubricity Behaviour of Nanolaminated Ti3SiC2 and Solid Lubricants
  • Radulescu, I., 2008, Numerical Methods Involved in Lubricant Life Cycle Determination
  • Hoffmann, T. J., 2008, Saint-Venant's Principle in Magnetoelasticity
  • Cieszko, M., 2008, Propagation of Ultrasonic Waves in Inhomogeneous Materials
  • Radulescu, A. V., 2008, Tribological Aspects of the Solid-Fluid Interaction for Fresh and Used Lubricants
  • Gavrilova, E., 2008, Forced Gas-Structure Vibrations in a Rectangular Tank
  • Lychev, S. A., 2008, Coupled Dynamics Thermoviscoelastic Problem
  • Rahaei, M. B., 2008, Primary Evaluation of the Wear Behavior of the Combustion Synthesized TiC-NiAl Composite as Mechanical Seal Rings
  • Cieszko, M., 2008, Description of Capillary Potential Curves of Porous Materials
  • Wojnar, R., 2008, Viscous Incompressible Flow in Porous Media
  • Tokarzewski, S., 2008, Matrix Pade Bounds on Effective Transport Coefficients of Anisotropic Two-Phase Media
  • Musielak, G., 2008, Determination of Moisture Dependance of Material Coefficients for Macaroni Dough
  • Dunajewski, I., 2008, Optimal Wireless Sensors Location for Widespread Structures Monitoring
  • Rahaei, M. B., 2008, Self-Propagating High Temperature Synthesis of Bulk TiC-NiAl Composite
  • Rahaei, M. B., 2008, Comparison Mechanical Properties of Combustion Synthesized TiC-NiAl with Sintering Mechanical Seal Rings and Cutting Tools
  • Kacianauskas, R., 2008, The Discrete Element Method with Applications to Simulations of Granular Flow and Dynamic Fracture of Solids
  • Bacigalupo, A., 2008, Modelling of Deformation and Damage of Heterogeneous-Engineering Structures: Masonry Mechanics
  • Nazarenko, L., 2008, Long-Term Microdamaging of Composites with Transversally Isotropic Components for Limited Function of Durability
  • Stepanova, L., 2008, Eigenspectra and Orders of Stress Singularity at a Mode I Crack in a Power-Law Medium
  • Plekhov, O., 2008, Thermodynamics of Plastic Deformation of Nanocrystalline Titanium
  • Erzar, B., 2008, Study of High Strain Rate Behaviour of Micro-Concrete
  • Mejak, G., 2008, Direct Numerical Computation of the Effective Material Properties of the Material with Random Distribution of the Microcracks
  • Mróz, K. P., 2008, The New Fracture Criterion for Mixed-Mode Crack. The MK Criterion
  • Marciniak, Z., 2008, The Energy Approach in the Calculation of Lives for High Cycle Fatigue
  • Sosnovskiy, L., 2008, Model of Deformable Rigid Body with Dangerous Volume
  • Wang, C. H., 2008, Interfacial Thermal Stress Analysis of an Elliptical Inclusion with an Imperfect Interface in Anisotropic Plane
  • Kozicki, J., 2008, Simulation of Fracture Process in Concrete Elements with Steel Fibres Using Discrete Lattice Model
  • Weglewski, W., 2008, Modelling of Chemo-Damage in Concrete Due to Sulfate Corrosion
  • Bobiński, J., 2008, FE-Modelling of Concrete Behaviour under Mixed Mode Conditions with Non-Local and Cohesive Constitutive Models
  • Pindra, N., 2008, Slight In-Plane Perturbation of a System of Two Coplanar Parallel Tensile Slit-Cracks
  • Kovacs, Adam, 2008, Strenght Analysis of a Square-Form Perforated Microfilter
  • Rusinek, A., 2008, Advanced Constitutive Relation for Numerical Applications: Modeling of Steels in a Wide Range of Strain Rates and Temperatures
  • Shukayev, S., 2008, Damage Accumulation Model for Low Cycle Fatigue under Multiaxial Sequential Loading
  • Jański, L., 2008, Simulations of Crack Growth in Piezoelectric Structures with Modern, Automatic and Efficient Finite Element Software
  • Kaczyński, A., 2008, Thermal Stresses Around an Interface Rigid Circular Inclusion in a Bimaterial Periodically Layered Space
  • Marzec, I., 2008, FE-Analysis of the Behaviour of Concrete Elements with Coupled Elasto-Plastic-Damage Models with Non-Local Softening
  • Kłosowski, P., 2008, Identification and Validation of Material Parameters for Isotropic Damage Model in Viscoplastic Flow Conditions
  • Shariff, M. H. B. M., 2008, Extension of Isotropic Mullins Models to Anisotropic Stress-Softening Models
  • Fedeliński, P., 2008, Computations of Effective Elastic Properties of Solids with Microcracks Using the Boundary Element Method
  • Zaitsev, A. V., 2008, Nonlocal Conditions for the Transition Damage to a Localized Failure in Granular and Fibre-Reinforced Composites under Quasistatic Loading
  • Jankowiak, T., 2008, Failure and Fracture of Concrete and Brick Walls Imposed by explosion
  • Jia, W. P., 2008, Effect of Strain Path Change on Microstructure and Properties of Hot-rolled Q235 Steel
  • Ghaffari, H. O., 2008, Contact State Analysis by RST, NFIS and SOM Systems
  • Bauer, E., 2008, Shear Band Analysis of Weathered Broken Rock in Dry and Wet States
  • Slominski, C., 2008, The Influence of Soil Plugging on the Driving Resistance and Bearing Capacity of Open-Ended Steel Piles
  • Morland, L. W., 2008, Age-Depth Correlation, Grain Growth and Dislocation Energy Evolution, for Three Ice Cores
  • Wilde, K., 2008, Experimental and Theoretical Investigations of Silo Music During Granular Flow
  • Tejchman, J., 2008, FE-Calculations of Stress Distribution under Prismatic and Conical Sandpiles within Hypoplasticity
  • Kozicki, J., 2008, Comparative Modeling of Shear Localization in Granular Bodies Using a Discrete and Continuum Approach
  • Panteleev, I., 2008, Scaling Laws of Damage-Failure Transition in Rocks: from Laboratory Tests to Earthquakes
  • Stankiewicz, A., 2008, Parametric Study of Gradient-Enhanced Cam-Clay Model
  • Wang, X. T., 2008, Update a Simple Hypoplastic Constitutive Model
  • Pinheiro, M., 2008, Incremental Plastic Response and Flow Rule Postulate under General Three-Dimensional Conditions
  • Jiang, Q. H., 2008, Three-Dimensional Discontinuous Deformation Analysis (3-D DDA) Coupled with Finite Element Method
  • Sawicki, A., 2008, Pre-Failure Behaviour of Granular Soils
  • Rojek, J., 2008, Simulation of Rock Cutting with Evaluation of Tool Wear
  • Górski, J., 2008, FE-Simulations of Size Effects in Granular and Quasi-Brittle Materials
  • Wrana, B., 2008, Identification of Damping in Soil by means of Morlet Wavelets
  • Balevicius, R., 2008, Comparison of Wall Pressures Measured in the Model Silo with DEM Simulation
  • Duan, H. L., 2008, Theory of Elasticity at the Nano-Scale
  • Dłużewski, Paweł, 2008, Dislocations in Atomistic/Continuum Modelling of Semiconductor Structures
  • Chiba, N., 2008, A Substrate Effect of Hardness in Film/Substrate Indentation: Finite Element Study on 'Overshoot' Phenomenon of Hardness
  • Pyrz, R., 2008, Atomic-Continuum Equivalence: Atomic Strain Tensor
  • Le, K. C., 2008, Bridging Length-Scale in Continuum Dislocation Theory
  • Staroszczyk, R., 2008, A Migration Recrystallization Model for Polar Ice
  • Kursa, M., 2008, The Energy Approach to Determining Plastic Deformation of Metal Crystals
  • Kowalczyk-Gajewska, Katarzyna, 2008, Micromechanical Modelling of Metallic Materials of High Specific Strenght Accounting for Slip-Twin Interactions
  • Poniżnik, Z., 2008, Modelling of Effective Elastic Properties of Interpenetrating Metal-Ceramic Networks
  • Petryk, H., 2008, Modelling of Microstructure Formation by Minimization of Incremental Energy Supply
  • Eremeyev, V. A., 2008, On Natural Strain Measures of the Non-Linear Micropolar Continuum
  • Svanadze, M., 2008, Boundary Value Problems in the Two-Temperature Theory of Thermoelasticity of Binary Mixtures
  • Oleśkiewicz, R., 2008, Piezoelectric Switching Technique for Vibration Damping
  • Manzhirov, A. V., 2008, Conformal Contact Between a Punch and a Layer with Thin Coating
  • Hammoud, M., 2008, A Coupled Discrete-Homogenized Approach to Study the Behavior of Ballast under Railways
  • Janus-Michalska, M., 2008, Micromechanical Model of Hyperelastic Behaviour of Cellular Materials
  • Anand, L., 2008, Mechanical Behavior of Bulk Metallic Glasses
  • Luckner, H. J., 2008, Mechanical Behaviour of TiAl Alloys During Static and Dynamic Deformations
  • Banach, Z., 2008, Wave and Diffusive Phonon Heat Transport in Dielectrics and Semiconductors under High Thermal Loads
  • Bartosz, K., 2008, Hemivariational Inequalities Modeling Dynamic Contact Problems in Viscoelasticity
  • Glema, A., 2008, Adiabatic Microdamage Anisotropy in Ductile Materials
  • Shodja, H. M., 2008, Size Effect of an Elliptic Inclusion in Anti-Plane Strain Couple Stress Elasticity
  • Pol, M. H., 2008, Analysis of Oblique Perforation of Conical and Ogive Projectiles into Thin Metallic Targets
  • Leu, S.-Y., 2008, On the Limit Internal Pressure of Hollow Cylinders of Strain Hardening Viscoplastic Materials
  • Chernyakov, Yu., 2008, The Influence of History of Precritical Loading on Bifurcation of Process of Deformation of Elastic-Plastic Bodies
  • Nowak, Z., 2008, Numerical Investigation of Localized Fracture in Polycrystalline Material (DH 36 Steel) During Dynamic Double Shear Loading Under Adiabatic Conditions
  • Bayandin, Yu., 2008, Mesodefect Induced Mechanisms of Plasticity and Failure in Shocked Solids
  • Żebro, T., 2008, A Gradient-Enhanced Coupled Damage-Plasticity Model in Large Strain Format
  • Souchet, R., 2008, On the Use of Gurson's Model in Continuum Damage Mechanics
  • Sherbakov, S., 2008, Three-Dimensional Stress-Strain of Roller-Shaft System in Conditions of Contact Interaction and Non-contact Bending of Shaft
  • Chernyakov, Yu., 2008, On Comparison of Theory of Microstrains with Theories, Based on the Conception of Sliding
  • Sherbakov, S., 2008, Influence of Stress-Strain State Caused by Non-Contact Forces on Formation of Contact Boundary Conditions
  • Vallee, C., 2008, Recovering the Bipotential of an Implicit Standard Material by Fitzpatrick's Method
  • Shimizu, S., 2008, Shear Behaviour of Hybrid Steel Girders
  • Eremeyev, V. A., 2008, On Phase Transitions in Thermoelastic and Thermoviscoelastic Shells
  • Abramovich, H., 2008, Exact Solutions of Problem of Statics, Dynamics and Stability of Non-Closed Circular Cylindrical Shells Strengthened in One Direction by "Almost Regularly Placed" Ribs
  • Pontow, J., 2008, Evaluation of the Perturbation Sensitivity and the Limit Loads of Shells by the Perturbation Energy Concept
  • Attarnejad, R., 2008, A Novel Method for Static Analysis of Thin Curved Shells with Variable Thickness
  • Kovalev, V., 2008, An Asymptotic Approach to Problems of Scattering Acoustic Waves by Elastic Shells
  • Khedmati, M. R., 2008, Buckling/Collapse Behaviour of Cylindrical Shells in Bilge Region of Ship Hull Girders under Inplane Compression
  • Geymonat, G., 2008, Controllability for Thin Linearly Elastic Shells
  • Grigorenko, Ya., 2008, Stress State of Nonthin Noncircular Orthotropic Cylindrical Shells with Variable Thickness under Different Types of Boundary Conditions
  • Wisniewski, K., 2008, On the Improved Membrane Part of Mixed Shell Elements
  • Klinkel, S., 2008, A Piezoelectric Solid Shell Element Accounting for Material and Geometrical Nonlinea
  • Budak, V. D., 2008, Free Vibrations of Orthotropic Shallow Shells of Variable Thickness on Basis of Spline-Approximation Method
  • Górski, J., 2008, Identification and Simulation of Shells Geometric Initial Imperfections
  • Pietraszkiewicz, W., 2008, On Determining the Deformed Shell Midsurface From Prescribed Surface Strains and Bendings
  • Kłosowski, P., 2008, Membrane Shell Finite Element for Textile Fabric Modelling Numerical and Experimental Aspects
  • Chróścielewski, J., 2008, Composite Shells in 6-Field Nonlinear Shell Theory
  • Myślecki, K., 2008, Vibrations of Thick Plate by Boundary Element Method
  • Kurpa, L., 2008, R-Functions Method Applying to Large Deflection Analysis of Orthotropic Shallow Shells on Elastic Foundation
  • Schlebusch, R., 2008, On a Surface-Related Shell Formulation for the Numerical Simulation of Textile Reinforced Concrete Layers
  • Khedmati, M. R., 2008, A Numerical Investigation Into the Effects of Parabolic Curvature on the Buckling Strength of Deck Stiffened Plates
  • Mardare, C., 2008, Recovery of Displacement Fields from Stress Tensor Fields in Shell Theory
  • Krużelecki, J., 2008, Optimal Stabilization of Postbuckling Path for Conical Shells under External Pressure
  • Bessoud, A. L., 2008, Multimaterials with Shell-like Reinforcement
  • Kreja, I., 2008, Large Elastic Deformations of Laminated Cylindrical Panels under Point Load
  • Harutyunyan, E., 2008, Investigation of Oscillation Process of the Shell Element by Method of Finite Elements
  • González-Montellano, C., 2008, The Effect of Patch Load on Corrugated Silo Walls
  • Loktev, A., 2008, Dynamic Contact of the Elastic Impactor and Spherical Shell
  • Sargsyan, S. H, 2008, Theory of Micropolar Thin Elastic Cylindrical Shells
  • Panasz, P., 2008, Nine-None Assumed Strain Shell Element with Drilling Rotation
  • Gavrylenko, G. D., 2008, Free Vibrations of Smooth Cylindrical Shells
  • Altenbach, H., 2008, On the Mechanics of Functionally Graded Plates
  • Kuznetsov, V., 2008, Formulation of the Initial Invariant-Based Shell Finite Element Model Using the Plane Curve Geometry
  • Birsan, M., 2008, Some Problems Concerning the Deformation of Anisotropic Cosserat Elastic Shells
  • Han, K. T., 2008, Development of Forming Process of the Muffler Tube for Heavy Equiments
  • Iwicki, P., 2008, Comparison of Non-Linear Statical Analysis of Truss with Linear and Rotational Side Supports and 3D Roof Model
  • Manzhirov, A. V., 2008, Raising of a Semi-Circular Vault
  • Sokół, T., 2008, Generalized Formulation of Eigenvalue Problem for Nonlinear Stability Analysis
  • Melcer, J., 2008, Shaking Experimental Investigation of Components for Fastening the Rails
  • Jankowski, R., 2008, Shaking Table Experimental Study on Structural Pounding during Earthquakes
  • Piotrowski, P. H., 2008, Parafabricated Structures under Earthquake Excitation: Damage and Failure of Connection Joints
  • Błachowski, B., 2008, A Hybrid Continuous-Discrete Approach to Large Discrete Structural Optimization Problems
  • Dems, K., 2008, Optimal Fibers Arragement in Single- and Multilayered Composite Materials
  • Szajek, K., 2008, Incorporating Two Optimization Algorithms into FEA Environment
  • Garstecki, A., 2008, Multi-Objective Optimal Design of Multi-Span Sandwich Panels with Soft Core, Allowing for Variable Support Conditions
  • Iancu, C., 2008, Static FEA of Mechanical Complex Structures
  • Chalecki, M., 2008, A Nonasymptotic Modelling of Heat Conduction in Solids Reinforced by Short Fibres with Functionally Gradation of Features
  • Nunziante, L., 2008, A Procedure for Defect Identification of Suspension Bridges Cables by means of Optical-Firbe Strain Measurements
  • Górski, R., 2008, Free Vibration Analysis of Stiffened Plates by the Boundary Element Method
  • Beluch, W., 2008, Evolutionary Computing in Multi-Objective Optimization of Laminates
  • Imiełowski, Sz., 2008, Energetic Approach to Stability of Beam/Columns Subjected to Deformation Dependent Loading
  • Gorjipoor, A., 2008, Genetic Algorithm Optimization of Helicopter Blades Vibration Transition
  • Khurana, A., 2008, Longitudinal Wave Response of a Chiral Slab Interposed Between Micropolar Solid Half-Spaces
  • Le Van, A., 2008, A Weak Formulation for the Large Deformation Contact Problem with Coulomb Friction
  • Zhang, Q., 2008, Off-Line Reconstruction of Dynamic Loads
  • Lisowski, K., 2008, Sparse Grid and Evolution-Type Algorithm in Shape Optimization for Beck's Column
  • Bojczuk, D., 2008, Geometric Sensitivity Analysis of Truss and Frame Structures
  • Bobylov, A., 2008, Application of the Stabilization Method for Analysis of Geometrically Non-Linear Forced Vibrations of Elastic Beams on Unilateral Winkler Foundation
  • Myśliński, A., 2008, Level Set Method in Structural Optimization
  • Dyniewicz, B., 2008, Inertial Moving Loads
  • Fischer, F. D., 2008, Physics, Chemistry and Mechanics are Growing Together - the Role of Nonequilibrium Thermodynamics
  • Stupkiewicz, S., 2008, Micromechanical Modelling of Pseudoelastic SMA Polycrystals under Non-proportional Loading
  • Tobushi, H., 2008, Torsional Deformation and Rotary Driving Characteristics of SMA Thin Strip
  • Pieczyska, E. A., 2008, Stress-Induced Martensite Transformation in TiNi SMA - Experimental Estimation of Energy Balance
  • Starenchenko, S., 2008, Influence of Plastic Deformation on Structural Characteristics and Long-Range Order in Ni3Al Alloy
  • Kowalski, S. J., 2008, Estimation of Material Effort During Drying Processes
  • Oliferuk, W., 2008, Stress-Strain Curve and Stored Energy During Uniaxial Deformation of Polycrystals
  • Pieczyska, E. A., 2008, Deformation Behavior of TiNi SMA Observed by Local Strain, Thermography and Transformation Band
  • Inoue, T., 2008, TransformationPlasticity the Mechanism, Constitutive Equation and Applications
  • Majchrzak, E., 2008, Identification of Boundary Heat Flux on the External Surface of Casting
  • Pieczyska, E. A., 2008, TiNi SMA - Investigation of Stress-Induced Martensite Reverse Transformation, Independent of Thermal Influences of the Forward One
  • Starenchenko, S., 2008, Features of the Temperature-Induced and Deformation-Induced Order-Disorder Phase Transition
  • Kowalski, S. J., 2008, Stress Reverse and Residual Stresses in Dried Materials
  • Ziętek, G., 2008, Description of Cyclic Hardening of Material with Plasticity Induced Martensitic Transformation
  • Urbina, C., 2008, Thermal Cycling Effect on Different Two Way Shape Memory Training Methods in NiTi Shape Memory Alloys
  • Ju, D. Y., 2008, Inelastic Behavior and Numerical Analysis in Twin-Roll Casting Process of AZ31 Alloy
  • Rodriguez-Martinez, J. A., 2008, Mechanical Behaviour of TRIP Steels Subjected to Low Impact Velocity at Wide Range of Temperatures

Nazwa wydania	Data
Birsan, M., 2008, Some Problems Concerning the Deformation of Anisotropic Cosserat Elastic Shells	2 paź 2020

Obiekty Podobne

Modelling Bone-Implant Dynamics

Nowak, B. Kaczmarek, M.

2008

Book/Chapter

• ris
• BibTeX

Orthotropic Model of Cancellous Bone. Application to Simulation of Adaptive Remodelling

Kowalczyk, P.

2008

Book/Chapter

• ris
• BibTeX

Application of Micro Computer Tomography to Identification of Pore Structure Parameters of Porous Material

Cieszko, Mieczysław Szczepański, Zbigniew

2008

Book/Chapter

• ris
• BibTeX

Application of Biomechanical Models in Design and Simulation of Active and Passive Vibration Damping

Maciejewski, I. Chamera, S. Krzyzynski, T.

2008

Book/Chapter

• ris
• BibTeX

Analysis of Shrinkage Stresses in Light-Cured Dental Restorations

Gambin, W. Kowalczyk, P.

2008

Book/Chapter

• ris
• BibTeX

Numerical Modelling of the Opening Process of the Three-Coating Aortic Valve

Kopernik, M. Nowak, J.

2008

Book/Chapter

• ris
• BibTeX

Effect of Special Layers Shaping on Stress Distribution in Dental Restoration

Kowalczyk, P.

2008

Book/Chapter

• ris
• BibTeX

The Numerical Modeling of Osteoporotic Changes in Selected Biomechanical Structures

John, A. Orantek, P. Wysota, P.

2008

Book/Chapter

• ris
• BibTeX

Więcej

podobne w FBC

Więcej w FBC