• Przejdź do menu głównego
• Przejdź do wyszukiwarki
• Przejdź do treści
• Przejdź do stopki

• Wyszukaj w całym Repozytorium
• Piśmiennictwo i mapy
• Archeologia
• Baza Młynów
• Nauki przyrodnicze

Szukaj w Repozytorium

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Nazwa/Tytuł Lokalizacja geograficzna Czasopismo/Seria/cykl Temat i słowa kluczowe

n.e. p.n.e.

n.e. p.n.e.

i lub

Nazwa/Tytuł Lokalizacja geograficzna Czasopismo/Seria/cykl Temat i słowa kluczowe

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Szukaj w Piśmiennictwo i mapy

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Tytuł Czasopismo/Seria/cykl Autor/Twórca Temat i słowa kluczowe Wydawca Data wydania Zakres przestrzenny

n.e. p.n.e.

n.e. p.n.e.

i lub

Tytuł Czasopismo/Seria/cykl Autor/Twórca Temat i słowa kluczowe Wydawca Data wydania Zakres przestrzenny

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Szukaj w Archeologia

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Nazwa Lokalizacja Rodzaj obiektu Kierownik badań/ Twórca kolekcji Chronologia Czasopismo/Seria/cykl Charakterystyka obiektu- surowiec Numer inwentarzowy

n.e. p.n.e.

n.e. p.n.e.

i lub

Nazwa Lokalizacja Rodzaj obiektu Kierownik badań/ Twórca kolekcji Chronologia Czasopismo/Seria/cykl Charakterystyka obiektu- surowiec Numer inwentarzowy

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Szukaj w Baza Młynów

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Nazwa ujednolicona Lokalizacja Rodzaj obiektu

n.e. p.n.e.

n.e. p.n.e.

i lub

Nazwa ujednolicona Lokalizacja Rodzaj obiektu

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Szukaj w Nauki przyrodnicze

Pole wyszukiwania Wyszukaj

Jak wyszukiwać... Wyszukiwanie zaawansowane

Wyszukiwanie zaawansowane

Zamknij

Wszystkie pola Szukaj w treści Akronim zielnika Numer/kod Kategoria ponadrodzajowa Nazwa łacińska Nazwa polska Lokalizacja Data zebrania Zbieracz/ Obserwator Typ (nomenklaturowy)

n.e. p.n.e.

n.e. p.n.e.

i lub

Akronim zielnika Numer/kod Kategoria ponadrodzajowa Nazwa łacińska Nazwa polska Lokalizacja Data zebrania Zbieracz/ Obserwator Typ (nomenklaturowy)

n.e. p.n.e.

n.e. p.n.e.

Usuń

Dodaj element zapytania

Typ nomenklaturowy

Obiekt zawiera współrzędne geograficzne

Jak wyszukiwać...

Wyszukaj

Poproś o dostęp

Odmowa wysyłania. Niepoprawny tekst z obrazka.

Odmowa wysyłania. Weryfikacja reCAPTCHA nie powiodła się.

Nie masz uprawnień do wyświetlenia tego obiektu. Aby poprosić o dostęp do niego, wypełnij poniższe pola.

E-mail^* Uzasadnienie^*

Wpisz tekst z obrazka. ^*

Anuluj Wyślij

Obiekt

Pobierz opis bibliograficzny

• ris
• BibTeX
• EndNote
• Csv

• pl en

Zaktualizowano subskrypcję.

Błąd podczas zmiany subskrypcji.

• Pokaż treść

Pobierz

• Opis
• Informacje
• Struktura

Tytuł: Modelling of Effective Elastic Properties of Interpenetrating Metal-Ceramic Networks

Twórca:

Poniżnik, Z. ; Salit, V. ; Basista, M. ; Gross, D.

Data wydania/powstania:

2008

Typ zasobu:

Tekst

Więcej

Inny tytuł:

Prace IPPT IFTR Reports ; 2/2008

Współtwórca:

Kotulski, Zbigniew (1955– ) : Red. ; Kowalczyk, Piotr Marian : Red. ; Sosnowski, Włodzimierz : Red.

Wydawca:

Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk

Miejsce wydania:

Warszawa

Opis:

Proceedings of the 36th Solid Mechanics Conference, Gdańsk, Poland, September 9-12, 2008 ; Rozszerzone streszczenia wykładów konferencyjnych ; 238-239 s.

Typ obiektu:

Książka/Rozdział

Czasopismo/Seria/cykl:

Prace IPPT IFTR REPORTS

Szczegółowy typ zasobu:

Książka

Format:

application/pdf

Identyfikator zasobu:

978-83-89687-35-7 ; 83-89687-35-6 ; oai:rcin.org.pl:33119

Źródło:

IPPT PAN, sygn. 56050 ; kliknij tutaj, żeby przejść

Język:

eng

Prawa:

Prawa zastrzeżone - dostęp nieograniczony

Zasady wykorzystania:

Zasób chroniony prawem autorskim. Korzystanie dozwolone w zakresie określonym przez przepisy o dozwolonym użytku.

Digitalizacja:

Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk

Lokalizacja oryginału:

Biblioteka Instytutu Podstawowych Problemów Techniki PAN

Dofinansowane ze środków:

Program Operacyjny Innowacyjna Gospodarka, lata 2010-2014, Priorytet 2. Infrastruktura strefy B + R ; Unia Europejska. Europejski Fundusz Rozwoju Regionalnego

Dostęp:

Otwarty

Temat i słowa kluczowe:

Mechanika- konferencje [KABA] Mechanika [KABA] Mechanika komputerowa Mechanika zniszczenia

Kolekcje, do których przypisany jest obiekt:

• Repozytorium Cyfrowe Instytutów Naukowych > Kolekcje Partnerów > Instytut Podstawowych Problemów Techniki PAN > Książki > Prace IPPT
• Repozytorium Cyfrowe Instytutów Naukowych > Piśmiennictwo > Książki/Rozdziały

Data ostatniej modyfikacji:

2 paź 2020

Data dodania obiektu:

5 wrz 2013

Liczba pobrań / odtworzeń:

272

Wszystkie dostępne wersje tego obiektu:

https://rcin.org.pl./publication/19743

Wyświetl opis w formacie RDF:

RDF

Wyświetl opis w formacie RDFa:

RDFa

Wyświetl opis w formacie OAI-PMH:

OAI-PMH

• Selected topics of contemporary solid mechanics : Praca zbiorowa
  • Strony tytułowe, przedmowa, spis treści, indeks autorów
  • Ritchie, R. O., 2008, On the fracture mechanics of bone and its biological degradation
  • Kaczmarek, M., 2008, Bio-poromechanics. Problems of Modelling Tissues and Biomaterials
  • Itskov, M., 2008, An Anisotropic Micromechanically Based Viscoelastic Model for Soft Collageneous Tissues
  • Colak, O. U., 2008, Cyclic Behavior of Ultra High Molecular Weight Polyethylene (UHMWPE) and Modeling
  • John, A., 2008, Selected Applications of Interval and Fuzzy Analysis in Biomechanics
  • Majchrzak, E., 2008, Solution of the Cattaneo-Vernotte Bio-Heat Transfer Equation by Means of the Dual Reciprocity Method
  • Piechór, K., 2008, Travelling Waves in Two Mechanochemical Models of Tumor Angiogenesis
  • Cieszko, M., 2008, Interaction of Ultrasonic Waves with Continuous Inhomogeneity of Porous Materials
  • John, A., 2008, The Numerical Modeling of Osteoporotic Changes in Selected Biomechanical Structures
  • Kowalczyk, P., 2008, Effect of Special Layers Shaping on Stress Distribution in Dental Restoration
  • Kopernik, M., 2008, Numerical Modelling of the Opening Process of the Three-Coating Aortic Valve
  • Gambin, W., 2008, Analysis of Shrinkage Stresses in Light-Cured Dental Restorations
  • Maciejewski, I., 2008, Application of Biomechanical Models in Design and Simulation of Active and Passive Vibration Damping
  • Cieszko, Mieczysław, 2008, Application of Micro Computer Tomography to Identification of Pore Structure Parameters of Porous Material
  • Kowalczyk, P., 2008, Orthotropic Model of Cancellous Bone. Application to Simulation of Adaptive Remodelling
  • Nowak, B., 2008, Modelling Bone-Implant Dynamics
  • Lekszycki, Tomasz, 2008, Modeling of Bone-Bioresorbable Graft Interaction
  • Foryś, U., 2008, Multidimensional Lotka-Volterra Systems for Carcinogenesis Mutations
  • Nowak, M., 2008, On Some Properties of Bone Functional Adaptation Phenomenon Useful In Mechanical Design
  • Gzik, M., 2008, Analysis of Influence of Human Head Movement on Cervical Spine Loading Conditions
  • Dąbrowska-Tkaczyk, A., 2008, Evaluation Method for Orthotropic Properties of Bone Tissue "in situ"
  • Gambin, Barbara, 2008, Rayleigh Scattering of Ultrasounds in Cancellous Bone
  • Gambin, Barbara, 2008, Fabric Tensor and Strength Surface of Bone-Like Materials
  • Wittenberghe, J. V., 2008, Analysis of a Preloaded Conical Threaded Pipe Connection
  • Ptaszny, J., 2008, Fast Multipole Evaluation of Domain Terms in Integral Equations of Two-Dimensional Elasticity
  • Chróścielewski, J., 2008, Modelling of Wave Propagation in Spatial Frame Elements - Numerical Simulations and Experimental Works
  • Beluch, W., 2008, Evolutionary Identification of Laminates' Stochastic Parameters
  • Orantek, P., 2008, The Local Gradient Method Supported by Artificial Neural Network in Granular Identification Problems
  • Kokot, G., 2008, The Complex Welding Process Simulation Using FEM, Parallel Computing and Grid Based Evolutionary Optimization
  • Fialko, S., 2008, Aggregation Multilevel Iterative Solver Based on Sparse Matrices Technique
  • Rec, T., 2008, Numerical Modeling of Macro Segregation Evolution and Change of Stress-Strain State in Billet During Continuous Casting with Mechanical Soft Reduction
  • Knabel, Jarosław, 2008, Structural Reliability Analysis Using Object Oriented Environment STAND
  • Czarnecki, S., 2008, An Elastic Cube Subjected to Anti-Symmetrical Pressure Loading. Exact 3D Analytical Formulae Versus Numerical Solutions Based on Meshfree Method
  • Abushawashi, Y. M., 2008, Convergence Behaviour for KPT Finite Elements
  • Gonzalez, I. M., 2008, ANN Approach for Modelling Orthogonal Cutting
  • Zmitrowicz, A., 2008, Contact Stresses - Models and Methods of Computations
  • Paczelt, I., 2008, Numerical Analysis of Some Steady State Wear Problems
  • Pidvysotskyy, V., 2008, Physical and Numerical Simulation of Forging of Cu-Cr Alloy
  • Szybiński, B., 2008, Numerical Analysis of Residual Stresses in Welds of Thick-walled Pressure Vessels
  • Garwolińska, A., 2008, Numerical Simulations of Laboratory and Field Tests of Permeability
  • Bednarek, T., 2008, Computer Aided Design of Vibrating Structures Accounting for Material Fatigue and Reliability
  • Dziatkiewicz, G., 2008, Indirect Trefftz Solutions for Plane Piezoelectricity by Stroh Formalism and Collocation Technique
  • Marin, N. C., 2008, Lagrangian and ALE Approach for Predicting Residual Stresses in Orthogonal Cutting
  • Łukasiak, T., 2008, The Adaptive NEM-Delaunay Elements
  • Orantek, P., 2008, Stochastic Identification in Thermomechanical Structures Using Evolutionary Algorithms
  • Wójcik, M., 2008, FE-Simulations of Dynamic Shear Localization in Granular Bodies Using an Arbitrary Lagrangian-Eulerian Formulation
  • Jach, K., 2008, Numerical Analyzes of Armour Steel Plates Penetration Process by Subcalibre Projectiles with Monolith and Segmented Penetrators
  • Jurczak, G., 2008, Indium Clusters Evolution in a InGaN/GaN QW
  • Ilic, S., 2008, Application of the Multiscale FEM to the Modeling of Composite Materials
  • Danielewski, M., 2008, Mechano-Chemistry at Different Lenght Scales
  • Frischmuth, K., 2008, Hyperbolic Heat Conduction with Fuzzy Parameters
  • Oliferuk, Wiera, 2008, Pulsed IR Thermography for Detection of Material Defects
  • Rahaei, M. B., 2008, Comparison Lubricity Behaviour of Nanolaminated Ti3SiC2 and Solid Lubricants
  • Radulescu, I., 2008, Numerical Methods Involved in Lubricant Life Cycle Determination
  • Hoffmann, T. J., 2008, Saint-Venant's Principle in Magnetoelasticity
  • Cieszko, M., 2008, Propagation of Ultrasonic Waves in Inhomogeneous Materials
  • Radulescu, A. V., 2008, Tribological Aspects of the Solid-Fluid Interaction for Fresh and Used Lubricants
  • Gavrilova, E., 2008, Forced Gas-Structure Vibrations in a Rectangular Tank
  • Lychev, S. A., 2008, Coupled Dynamics Thermoviscoelastic Problem
  • Rahaei, M. B., 2008, Primary Evaluation of the Wear Behavior of the Combustion Synthesized TiC-NiAl Composite as Mechanical Seal Rings
  • Cieszko, M., 2008, Description of Capillary Potential Curves of Porous Materials
  • Wojnar, R., 2008, Viscous Incompressible Flow in Porous Media
  • Tokarzewski, S., 2008, Matrix Pade Bounds on Effective Transport Coefficients of Anisotropic Two-Phase Media
  • Musielak, G., 2008, Determination of Moisture Dependance of Material Coefficients for Macaroni Dough
  • Dunajewski, I., 2008, Optimal Wireless Sensors Location for Widespread Structures Monitoring
  • Rahaei, M. B., 2008, Self-Propagating High Temperature Synthesis of Bulk TiC-NiAl Composite
  • Rahaei, M. B., 2008, Comparison Mechanical Properties of Combustion Synthesized TiC-NiAl with Sintering Mechanical Seal Rings and Cutting Tools
  • Kacianauskas, R., 2008, The Discrete Element Method with Applications to Simulations of Granular Flow and Dynamic Fracture of Solids
  • Bacigalupo, A., 2008, Modelling of Deformation and Damage of Heterogeneous-Engineering Structures: Masonry Mechanics
  • Nazarenko, L., 2008, Long-Term Microdamaging of Composites with Transversally Isotropic Components for Limited Function of Durability
  • Stepanova, L., 2008, Eigenspectra and Orders of Stress Singularity at a Mode I Crack in a Power-Law Medium
  • Plekhov, O., 2008, Thermodynamics of Plastic Deformation of Nanocrystalline Titanium
  • Erzar, B., 2008, Study of High Strain Rate Behaviour of Micro-Concrete
  • Mejak, G., 2008, Direct Numerical Computation of the Effective Material Properties of the Material with Random Distribution of the Microcracks
  • Mróz, K. P., 2008, The New Fracture Criterion for Mixed-Mode Crack. The MK Criterion
  • Marciniak, Z., 2008, The Energy Approach in the Calculation of Lives for High Cycle Fatigue
  • Sosnovskiy, L., 2008, Model of Deformable Rigid Body with Dangerous Volume
  • Wang, C. H., 2008, Interfacial Thermal Stress Analysis of an Elliptical Inclusion with an Imperfect Interface in Anisotropic Plane
  • Kozicki, J., 2008, Simulation of Fracture Process in Concrete Elements with Steel Fibres Using Discrete Lattice Model
  • Weglewski, W., 2008, Modelling of Chemo-Damage in Concrete Due to Sulfate Corrosion
  • Bobiński, J., 2008, FE-Modelling of Concrete Behaviour under Mixed Mode Conditions with Non-Local and Cohesive Constitutive Models
  • Pindra, N., 2008, Slight In-Plane Perturbation of a System of Two Coplanar Parallel Tensile Slit-Cracks
  • Kovacs, Adam, 2008, Strenght Analysis of a Square-Form Perforated Microfilter
  • Rusinek, A., 2008, Advanced Constitutive Relation for Numerical Applications: Modeling of Steels in a Wide Range of Strain Rates and Temperatures
  • Shukayev, S., 2008, Damage Accumulation Model for Low Cycle Fatigue under Multiaxial Sequential Loading
  • Jański, L., 2008, Simulations of Crack Growth in Piezoelectric Structures with Modern, Automatic and Efficient Finite Element Software
  • Kaczyński, A., 2008, Thermal Stresses Around an Interface Rigid Circular Inclusion in a Bimaterial Periodically Layered Space
  • Marzec, I., 2008, FE-Analysis of the Behaviour of Concrete Elements with Coupled Elasto-Plastic-Damage Models with Non-Local Softening
  • Kłosowski, P., 2008, Identification and Validation of Material Parameters for Isotropic Damage Model in Viscoplastic Flow Conditions
  • Shariff, M. H. B. M., 2008, Extension of Isotropic Mullins Models to Anisotropic Stress-Softening Models
  • Fedeliński, P., 2008, Computations of Effective Elastic Properties of Solids with Microcracks Using the Boundary Element Method
  • Zaitsev, A. V., 2008, Nonlocal Conditions for the Transition Damage to a Localized Failure in Granular and Fibre-Reinforced Composites under Quasistatic Loading
  • Jankowiak, T., 2008, Failure and Fracture of Concrete and Brick Walls Imposed by explosion
  • Jia, W. P., 2008, Effect of Strain Path Change on Microstructure and Properties of Hot-rolled Q235 Steel
  • Ghaffari, H. O., 2008, Contact State Analysis by RST, NFIS and SOM Systems
  • Bauer, E., 2008, Shear Band Analysis of Weathered Broken Rock in Dry and Wet States
  • Slominski, C., 2008, The Influence of Soil Plugging on the Driving Resistance and Bearing Capacity of Open-Ended Steel Piles
  • Morland, L. W., 2008, Age-Depth Correlation, Grain Growth and Dislocation Energy Evolution, for Three Ice Cores
  • Wilde, K., 2008, Experimental and Theoretical Investigations of Silo Music During Granular Flow
  • Tejchman, J., 2008, FE-Calculations of Stress Distribution under Prismatic and Conical Sandpiles within Hypoplasticity
  • Kozicki, J., 2008, Comparative Modeling of Shear Localization in Granular Bodies Using a Discrete and Continuum Approach
  • Panteleev, I., 2008, Scaling Laws of Damage-Failure Transition in Rocks: from Laboratory Tests to Earthquakes
  • Stankiewicz, A., 2008, Parametric Study of Gradient-Enhanced Cam-Clay Model
  • Wang, X. T., 2008, Update a Simple Hypoplastic Constitutive Model
  • Pinheiro, M., 2008, Incremental Plastic Response and Flow Rule Postulate under General Three-Dimensional Conditions
  • Jiang, Q. H., 2008, Three-Dimensional Discontinuous Deformation Analysis (3-D DDA) Coupled with Finite Element Method
  • Sawicki, A., 2008, Pre-Failure Behaviour of Granular Soils
  • Rojek, J., 2008, Simulation of Rock Cutting with Evaluation of Tool Wear
  • Górski, J., 2008, FE-Simulations of Size Effects in Granular and Quasi-Brittle Materials
  • Wrana, B., 2008, Identification of Damping in Soil by means of Morlet Wavelets
  • Balevicius, R., 2008, Comparison of Wall Pressures Measured in the Model Silo with DEM Simulation
  • Duan, H. L., 2008, Theory of Elasticity at the Nano-Scale
  • Dłużewski, Paweł, 2008, Dislocations in Atomistic/Continuum Modelling of Semiconductor Structures
  • Chiba, N., 2008, A Substrate Effect of Hardness in Film/Substrate Indentation: Finite Element Study on 'Overshoot' Phenomenon of Hardness
  • Pyrz, R., 2008, Atomic-Continuum Equivalence: Atomic Strain Tensor
  • Le, K. C., 2008, Bridging Length-Scale in Continuum Dislocation Theory
  • Staroszczyk, R., 2008, A Migration Recrystallization Model for Polar Ice
  • Kursa, M., 2008, The Energy Approach to Determining Plastic Deformation of Metal Crystals
  • Kowalczyk-Gajewska, Katarzyna, 2008, Micromechanical Modelling of Metallic Materials of High Specific Strenght Accounting for Slip-Twin Interactions
  • Poniżnik, Z., 2008, Modelling of Effective Elastic Properties of Interpenetrating Metal-Ceramic Networks
  • Petryk, H., 2008, Modelling of Microstructure Formation by Minimization of Incremental Energy Supply
  • Eremeyev, V. A., 2008, On Natural Strain Measures of the Non-Linear Micropolar Continuum
  • Svanadze, M., 2008, Boundary Value Problems in the Two-Temperature Theory of Thermoelasticity of Binary Mixtures
  • Oleśkiewicz, R., 2008, Piezoelectric Switching Technique for Vibration Damping
  • Manzhirov, A. V., 2008, Conformal Contact Between a Punch and a Layer with Thin Coating
  • Hammoud, M., 2008, A Coupled Discrete-Homogenized Approach to Study the Behavior of Ballast under Railways
  • Janus-Michalska, M., 2008, Micromechanical Model of Hyperelastic Behaviour of Cellular Materials
  • Anand, L., 2008, Mechanical Behavior of Bulk Metallic Glasses
  • Luckner, H. J., 2008, Mechanical Behaviour of TiAl Alloys During Static and Dynamic Deformations
  • Banach, Z., 2008, Wave and Diffusive Phonon Heat Transport in Dielectrics and Semiconductors under High Thermal Loads
  • Bartosz, K., 2008, Hemivariational Inequalities Modeling Dynamic Contact Problems in Viscoelasticity
  • Glema, A., 2008, Adiabatic Microdamage Anisotropy in Ductile Materials
  • Shodja, H. M., 2008, Size Effect of an Elliptic Inclusion in Anti-Plane Strain Couple Stress Elasticity
  • Pol, M. H., 2008, Analysis of Oblique Perforation of Conical and Ogive Projectiles into Thin Metallic Targets
  • Leu, S.-Y., 2008, On the Limit Internal Pressure of Hollow Cylinders of Strain Hardening Viscoplastic Materials
  • Chernyakov, Yu., 2008, The Influence of History of Precritical Loading on Bifurcation of Process of Deformation of Elastic-Plastic Bodies
  • Nowak, Z., 2008, Numerical Investigation of Localized Fracture in Polycrystalline Material (DH 36 Steel) During Dynamic Double Shear Loading Under Adiabatic Conditions
  • Bayandin, Yu., 2008, Mesodefect Induced Mechanisms of Plasticity and Failure in Shocked Solids
  • Żebro, T., 2008, A Gradient-Enhanced Coupled Damage-Plasticity Model in Large Strain Format
  • Souchet, R., 2008, On the Use of Gurson's Model in Continuum Damage Mechanics
  • Sherbakov, S., 2008, Three-Dimensional Stress-Strain of Roller-Shaft System in Conditions of Contact Interaction and Non-contact Bending of Shaft
  • Chernyakov, Yu., 2008, On Comparison of Theory of Microstrains with Theories, Based on the Conception of Sliding
  • Sherbakov, S., 2008, Influence of Stress-Strain State Caused by Non-Contact Forces on Formation of Contact Boundary Conditions
  • Vallee, C., 2008, Recovering the Bipotential of an Implicit Standard Material by Fitzpatrick's Method
  • Shimizu, S., 2008, Shear Behaviour of Hybrid Steel Girders
  • Eremeyev, V. A., 2008, On Phase Transitions in Thermoelastic and Thermoviscoelastic Shells
  • Abramovich, H., 2008, Exact Solutions of Problem of Statics, Dynamics and Stability of Non-Closed Circular Cylindrical Shells Strengthened in One Direction by "Almost Regularly Placed" Ribs
  • Pontow, J., 2008, Evaluation of the Perturbation Sensitivity and the Limit Loads of Shells by the Perturbation Energy Concept
  • Attarnejad, R., 2008, A Novel Method for Static Analysis of Thin Curved Shells with Variable Thickness
  • Kovalev, V., 2008, An Asymptotic Approach to Problems of Scattering Acoustic Waves by Elastic Shells
  • Khedmati, M. R., 2008, Buckling/Collapse Behaviour of Cylindrical Shells in Bilge Region of Ship Hull Girders under Inplane Compression
  • Geymonat, G., 2008, Controllability for Thin Linearly Elastic Shells
  • Grigorenko, Ya., 2008, Stress State of Nonthin Noncircular Orthotropic Cylindrical Shells with Variable Thickness under Different Types of Boundary Conditions
  • Wisniewski, K., 2008, On the Improved Membrane Part of Mixed Shell Elements
  • Klinkel, S., 2008, A Piezoelectric Solid Shell Element Accounting for Material and Geometrical Nonlinea
  • Budak, V. D., 2008, Free Vibrations of Orthotropic Shallow Shells of Variable Thickness on Basis of Spline-Approximation Method
  • Górski, J., 2008, Identification and Simulation of Shells Geometric Initial Imperfections
  • Pietraszkiewicz, W., 2008, On Determining the Deformed Shell Midsurface From Prescribed Surface Strains and Bendings
  • Kłosowski, P., 2008, Membrane Shell Finite Element for Textile Fabric Modelling Numerical and Experimental Aspects
  • Chróścielewski, J., 2008, Composite Shells in 6-Field Nonlinear Shell Theory
  • Myślecki, K., 2008, Vibrations of Thick Plate by Boundary Element Method
  • Kurpa, L., 2008, R-Functions Method Applying to Large Deflection Analysis of Orthotropic Shallow Shells on Elastic Foundation
  • Schlebusch, R., 2008, On a Surface-Related Shell Formulation for the Numerical Simulation of Textile Reinforced Concrete Layers
  • Khedmati, M. R., 2008, A Numerical Investigation Into the Effects of Parabolic Curvature on the Buckling Strength of Deck Stiffened Plates
  • Mardare, C., 2008, Recovery of Displacement Fields from Stress Tensor Fields in Shell Theory
  • Krużelecki, J., 2008, Optimal Stabilization of Postbuckling Path for Conical Shells under External Pressure
  • Bessoud, A. L., 2008, Multimaterials with Shell-like Reinforcement
  • Kreja, I., 2008, Large Elastic Deformations of Laminated Cylindrical Panels under Point Load
  • Harutyunyan, E., 2008, Investigation of Oscillation Process of the Shell Element by Method of Finite Elements
  • González-Montellano, C., 2008, The Effect of Patch Load on Corrugated Silo Walls
  • Loktev, A., 2008, Dynamic Contact of the Elastic Impactor and Spherical Shell
  • Sargsyan, S. H, 2008, Theory of Micropolar Thin Elastic Cylindrical Shells
  • Panasz, P., 2008, Nine-None Assumed Strain Shell Element with Drilling Rotation
  • Gavrylenko, G. D., 2008, Free Vibrations of Smooth Cylindrical Shells
  • Altenbach, H., 2008, On the Mechanics of Functionally Graded Plates
  • Kuznetsov, V., 2008, Formulation of the Initial Invariant-Based Shell Finite Element Model Using the Plane Curve Geometry
  • Birsan, M., 2008, Some Problems Concerning the Deformation of Anisotropic Cosserat Elastic Shells
  • Han, K. T., 2008, Development of Forming Process of the Muffler Tube for Heavy Equiments
  • Iwicki, P., 2008, Comparison of Non-Linear Statical Analysis of Truss with Linear and Rotational Side Supports and 3D Roof Model
  • Manzhirov, A. V., 2008, Raising of a Semi-Circular Vault
  • Sokół, T., 2008, Generalized Formulation of Eigenvalue Problem for Nonlinear Stability Analysis
  • Melcer, J., 2008, Shaking Experimental Investigation of Components for Fastening the Rails
  • Jankowski, R., 2008, Shaking Table Experimental Study on Structural Pounding during Earthquakes
  • Piotrowski, P. H., 2008, Parafabricated Structures under Earthquake Excitation: Damage and Failure of Connection Joints
  • Błachowski, B., 2008, A Hybrid Continuous-Discrete Approach to Large Discrete Structural Optimization Problems
  • Dems, K., 2008, Optimal Fibers Arragement in Single- and Multilayered Composite Materials
  • Szajek, K., 2008, Incorporating Two Optimization Algorithms into FEA Environment
  • Garstecki, A., 2008, Multi-Objective Optimal Design of Multi-Span Sandwich Panels with Soft Core, Allowing for Variable Support Conditions
  • Iancu, C., 2008, Static FEA of Mechanical Complex Structures
  • Chalecki, M., 2008, A Nonasymptotic Modelling of Heat Conduction in Solids Reinforced by Short Fibres with Functionally Gradation of Features
  • Nunziante, L., 2008, A Procedure for Defect Identification of Suspension Bridges Cables by means of Optical-Firbe Strain Measurements
  • Górski, R., 2008, Free Vibration Analysis of Stiffened Plates by the Boundary Element Method
  • Beluch, W., 2008, Evolutionary Computing in Multi-Objective Optimization of Laminates
  • Imiełowski, Sz., 2008, Energetic Approach to Stability of Beam/Columns Subjected to Deformation Dependent Loading
  • Gorjipoor, A., 2008, Genetic Algorithm Optimization of Helicopter Blades Vibration Transition
  • Khurana, A., 2008, Longitudinal Wave Response of a Chiral Slab Interposed Between Micropolar Solid Half-Spaces
  • Le Van, A., 2008, A Weak Formulation for the Large Deformation Contact Problem with Coulomb Friction
  • Zhang, Q., 2008, Off-Line Reconstruction of Dynamic Loads
  • Lisowski, K., 2008, Sparse Grid and Evolution-Type Algorithm in Shape Optimization for Beck's Column
  • Bojczuk, D., 2008, Geometric Sensitivity Analysis of Truss and Frame Structures
  • Bobylov, A., 2008, Application of the Stabilization Method for Analysis of Geometrically Non-Linear Forced Vibrations of Elastic Beams on Unilateral Winkler Foundation
  • Myśliński, A., 2008, Level Set Method in Structural Optimization
  • Dyniewicz, B., 2008, Inertial Moving Loads
  • Fischer, F. D., 2008, Physics, Chemistry and Mechanics are Growing Together - the Role of Nonequilibrium Thermodynamics
  • Stupkiewicz, S., 2008, Micromechanical Modelling of Pseudoelastic SMA Polycrystals under Non-proportional Loading
  • Tobushi, H., 2008, Torsional Deformation and Rotary Driving Characteristics of SMA Thin Strip
  • Pieczyska, E. A., 2008, Stress-Induced Martensite Transformation in TiNi SMA - Experimental Estimation of Energy Balance
  • Starenchenko, S., 2008, Influence of Plastic Deformation on Structural Characteristics and Long-Range Order in Ni3Al Alloy
  • Kowalski, S. J., 2008, Estimation of Material Effort During Drying Processes
  • Oliferuk, W., 2008, Stress-Strain Curve and Stored Energy During Uniaxial Deformation of Polycrystals
  • Pieczyska, E. A., 2008, Deformation Behavior of TiNi SMA Observed by Local Strain, Thermography and Transformation Band
  • Inoue, T., 2008, TransformationPlasticity the Mechanism, Constitutive Equation and Applications
  • Majchrzak, E., 2008, Identification of Boundary Heat Flux on the External Surface of Casting
  • Pieczyska, E. A., 2008, TiNi SMA - Investigation of Stress-Induced Martensite Reverse Transformation, Independent of Thermal Influences of the Forward One
  • Starenchenko, S., 2008, Features of the Temperature-Induced and Deformation-Induced Order-Disorder Phase Transition
  • Kowalski, S. J., 2008, Stress Reverse and Residual Stresses in Dried Materials
  • Ziętek, G., 2008, Description of Cyclic Hardening of Material with Plasticity Induced Martensitic Transformation
  • Urbina, C., 2008, Thermal Cycling Effect on Different Two Way Shape Memory Training Methods in NiTi Shape Memory Alloys
  • Ju, D. Y., 2008, Inelastic Behavior and Numerical Analysis in Twin-Roll Casting Process of AZ31 Alloy
  • Rodriguez-Martinez, J. A., 2008, Mechanical Behaviour of TRIP Steels Subjected to Low Impact Velocity at Wide Range of Temperatures

Nazwa wydania	Data
Poniżnik, Z., 2008, Modelling of Effective Elastic Properties of Interpenetrating Metal-Ceramic Networks	2 paź 2020

Obiekty Podobne

One-dimensional constitutive model of microcracked elastic solid

Basista, M. Gross, D.

1985

Czasopismo/Artykuł

• ris
• BibTeX

Modelling of effective properties and fracture of metal-ceramic interpenetrating phase composites

Poniżnik, Z.

2018

Książka/Rozdział

• ris
• BibTeX

Thermal Residual Stresses in Alumina Reinforced with Chromium - the Grain Size Effect

Węglewski, W. Basista, M. Krajewski, M. Bochenek, K.

2018

Książka/Rozdział

• ris
• BibTeX

Preface

Basista, M. Nowacki, W. K. Kravtchenko, J. Gutkowski, W. Maugin, G. A. Woźniak, Cz.

1988

Czasopismo/Artykuł

• ris
• BibTeX

Więcej

podobne w FBC

Więcej w FBC